HDMI 2.0(a/b) w/HDR & HDCP 2.34K-->480 Downscaler480-->4K UpscalerPlug & Play Auto Scaling & EDID16 EDID Options (Including Auto & HDR EDID Options)Custom User EDID OptionL/R Audio De-embeddingVideo Enhancement CircuitSimple, easy to use. 3-Button OperationKey benefits of using AC-SC2-AUHD-GEN2:
Full HDR Support: With a plethora of HDR EDID's to choose from, HDR is now able to be activated on capable displays no matter what the infrastructure requires. This allows flexibility in system design and allows you to maximize budgets by providing HDR content where you want it.
Fixed Output Up/Down Scaling: This is possibly one of the most important features in the mixed system. Most AVR's, matrix switchers, and other peripherals do not have the ability to scale. Typically, 4K systems are limited to the maximum resolution of the cheapest or oldest display. If you took the most expensive 4K matrix, you would still have to "dumb down" the entire system to be compatible. The AC-SC2-AUHD-GEN2 is the solution! Simply place the scaler in before the older display/s and enjoy 4K content on the capable displays while keeping the same content on the other displays. The fixed output allows you to "Set it and forget it". For example, If you have a 720P display, set the AC-SC2-AUHD-GEN2 to 720P and any inbound signal will be scaled up or down to 720.
Interlaced to Progressive Scaling: This advanced technology will help installers overcome problematic 1080i sources by converting interlaced signals to progressive signals. Example, you can convert a 1080i signal to 1080P, 4K 30Hz, 4K 60Hz 4:2:0, or 4K 60Hz 4:4:4 at the users will.
Adaptive Scaling Mode: This EXCLUSIVE AVPro Edge technology was designed specifically to overcome problems with legacy sources, like set-top boxes outputting 720P or 1080i. When these legacy formats are implemented into modern, high bandwidth distribution systems sink devices can exhibit stability issues. The Adaptive Scaling mode will convert all signals less than 1080P to 1080P and will bypass 4K and HDR signals through untouched. This will allow you to comfortably install legacy sources in modern systems.
The Most Advanced EDID Management: There are 16 pre-loaded EDID settings from legacy technology (480) to full 4K and HDR Options. This is the only device that will provide this unique EDID combination. The AC-SC2-AUHD also has custom user EDID for future use, total customization and EDID bypass for using the sink EDID.
L/R Audio De-Embedding: The AC-SC2-AUHD-GEN2 has an audio output which allows audio to be stripped anywhere in a system and re-routed to where it’s needed most. AC-SC2-AUHD-GEN2 units can be combined and multiple streams can be stripped from multiple outputs or sources. (PCM only, this does not downmix)
On Board Troubleshooting: This unit allows you to generate a 720P, 1080P or 4K test pattern to identify external problems (source, repeater, displays, etc...). You can now be sure that your wiring is correct and get to the bottom of problems quickly should they arise, without having to worrying if the source or sink is working properly. You can generate a test pattern from the Tx or the Rx so you can verify total system infrastructure integrity.
Applications:
- For mixed systems with SD, HD and UHD displays within a matrix. Since a matrix will typically “down-clock” to the lowest common format, putting a scaler in will essentially “trick” the matrix into sending 4K UHD material. The scaler will downscale the content to 1080P for the HD display.
- As an Audio Extractor – Stand-alone audio extractors cost about the same thing, so purchasing the AC-SC2-AUHD-GEN2 which does so much more, is a no brainer.
- EDID causes about 80% of HDMI connectivity issues – The AC-SC2-AUHD-GEN2 can fix them all.
- EDID
capture and emulation – would you like to test end points prior to
hanging that 600 pound projector 100 feet up on the ceiling? Use the
AC-SC2-AUHD-GEN2 and your problem is solved
WARNING: May contain chemicals known to the State of California to cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov.