 |
 |
 |
 |
|
 |
|
Features
- Plug & Play – Field Firmware Updatable
- 18 Gbps Video Bandwidth
- Use single UTP/STP LAN cable (CAT-6A) with a substitute HDMI cable to achieve long-distance transmission.
- UTP/STP cable termination follows the standard of IEEE-568B.
- Transmission distance reaches up to 70 meters at 4K and 1080p up to 100 meters.
- PoC (RX powered by Matrix)
- HDMI V2.0(a/b) supported.
- HDCP 2.3 / 1.4 compliant.
- HDR Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- LED indicators monitoring power status.
- ESD protection circuitry (Inputs / Outputs) till 7KV.
- Pair of mounting brackets (supplied)
- Transfer Bi-directional IR & RS-232
- Can Cascade
Key benefits of using AC-EX70-444-RNE:
1) EXTEND 4K HDMI: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after even shorter distances. Additionally, HDMI connectors can only be terminated in a specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-6A cables are available widely and can be reworked easily by the installer or end-user.
2) DISTANCE: By using AC-EX70-444-RNE, the transmission distance for 18Gbps 4K with HDR is up to 70 meters (230’).
3) CONTROL: IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa.
4) POWER: PoH (Power over HDBaseT) function is intended to power RX from the TX and the advantage of a lightweight (160 gram) super-slim extender is to be mounted anywhere where space is at a premium.
5) FIELD UPDATES: Should a firmware update be necessary it can be accomplished in the field
WARNING: May contain chemicals known to the State of California to cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
|
|
|
|
|
|
|
|
|
