Where
to Install:
8K
Home Theater Upgrade
Do you
want to offer your current customers an 8K Home Theater? For your customer to
connect multiple sources that are both 8K & 4K, they must have a Matrix
Switcher.
Displays
have one HDMI port that is better than the others. Connecting to the 8K 4x2
allows users to use the best HDMI port all the time and get the most optimized
pictures possible. You can now have your gaming console, streaming device, and
satellite receiver connected to a controllable matrix switcher that works with
any 3rd party control system like Control 4, Crestron, or Josh.ai.
Legacy
(4K/1080p) AVR Workaround
With 8K
Televisions and 8K gaming consoles being a standard part of every luxury home,
integrators can run into significant problems using an AVR to route massive 8K
signals. With AVPro Edge’s 8K 4x2 matrix switcher, you can cleanly route
uncompressed video from 8K & 4K sources directly to your 8K display or
projector. At the same time, you can send a down-scaled signal to your AVR.
This workaround ensures you get the highest quality sound without having to
sacrifice your video.
With this
device, you can send 8K HDR content with full bitstream audio from HDMI 2.1
sources like Xbox Series X or PS5 gaming consoles directly to your TV and have
a down-scaled mirrored output go to your current AVR. You to use the AVR already
in the system while still delivering a complete 8K system.
Dual
Output for working with Dual Screens
This
matrix switcher has two outputs allowing you to control the content on two different
8K displays. Perfect for condo or apartment installations where 8K televisions
are being installed or add a second display to your home theater mounted near a
home bar or the adjacent room.
Downscale
the same 8K signal for the 4K/1080p display. With the built-in downscaler, you
can have the second display be a 4k or even 1080p legacy model and send full 8k
content to the TV that can handle it. This ability to downscale gives your
customers what they want, a picture on the 8K screen, while not worrying about
HDMI compatibility issues.
Full
Feature Set
- HDMI
2.1
- FRL (5)
- HDCP 2.3
- 40Gbps
Bandwidth Support
- 8K60
4:2:0 Support
4K resolutions at
120 frames per second
- 8K resolutions at 60 frames per
second
- Full
HDR Support (HDR 10 & 12 Bit)
- Dolby
Vision, HDR10+ and HLG Support
- HDCP
2.3 (and all earlier versions supported)
- 8K
> 1080p Down Scaler (Out 2)
- Perfect
AVR Bypass deliver 40Gbps to Display and uncompressed audio to AVR
- Advanced
EDID Management
- IR,
RS-232 and LAN Control Options
- Digital
Toslink Out (7CH PCM, DD, DTS)
- Balanced
Analog Out (2CH PCM)
- Down-scaling
mode for mixed systems
- Driver
Support for Crestron, C4, RTI, ELAN and more
- Extracted
Audio Supports DD+ on Toslink
- Extracted
Audio bound to output 1 or 2
What’s
in the box?
- AC-MX-42X (Matrix
Switch)
- 5V/2A
Locking Power Supply
- 1
x IR Remote Control
- 1
x 3 Pin Terminal Connector (For RS232)
- Mounting
Ears