 |
 |
 |
 |
ConferX Universal Amplifier: The Professional Choice for Video Distribution Solutions AC-CX100-RAMP ConferX 100 Meter Receiver and Class-D Amplifier The Universal Amplifier is a multi-purpose device that serves several functions in today’s classroom, conference
room and boardroom and includes an IP controllable 2 channel 25W Amplifier with
microphone, line, HDMI and HDBaseT inputs, Full 18Gbps throughout (100M HDBaseT
10.2 Gbps). Outputs are scalable from 2K to 4K and 4K to 2K and there are
additional audio outputs for recorders, additional amplifiers, audio matrices
or other devices. Full EDID management makes setup a breeze and the on-screen
display (OSD) provides critical information for the system operator and
installer. The CX100-RAMP supports both ARC and eARC so all high bitrate audio
codecs are supported. A built-in circuit for eARC automatically detects delay
information from the display and corrects time delay up to 170 msec. All of
these functions support collaboration for large and small groups!
Amplify: -Microphone -HDMI -HDBaseT -Line In/Distributed Audio
Welcome to ConferX, the professional choice for video distribution solutions
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- HDMI 2.0 Input
- 4K 30 4:4:4, 4K60 4:2:0 HDMI
Support
- HDR 4:2:2 12 Bit Support
- HDCP 2.3 & Earlier
Supported
- HDBaseT input port: 100M
(330ft) 0n 1080P, Up to 70m (230ft) on 4K (Cat6a)
- CEC Pass Through
- Stable Power input
- Rugged, long-life chassis
- EDID management
- Designed for the
conference/classroom room so your customer can focus on their meetings,
not their audio/video system.
- Microphone input and control
- Audio channel overlay
- Inputs: 4K HDMI, 4K HDBaseT
(100M), Microphone, Line Audio
- Outputs: 2 4K HDMI ports 1
scalable and 1 eARC, amplified (25 watts per channel) 2-channel audio,
line audio and digital line audio
- Supports uncompressed PCM 2-
Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio,
Atmos.
- Full 4k60 444:422:RGB capable
from and between the HDMI INPUT to both HDMI OUTPUTS
- Audio Delay - 170msec total for
stereo, around 85msec per channel
- Easy to use web os which
is easily controlled on iphone or android
Key Benifeits of using the AC-CX100-RAMP
1) IP controlled 25 w per
channel amplifier - use any
control system or webOS to control the amplifier, very easy to integrate into
existing rooms and new builds.
2) The product supports audio delay up to 170 msec - This is used for correcting latency associated with
eARC. eARC from sink (TV) tells how long video frames take to display in
TV (maybe around 2-3 frames = 50msec) and feeds this info to CX100-RAMP – The
CX100-RAMP delays by this amount automatically.
3) OSD – Onscreen
Display – a robust OSD allows operator and installer see real time data on
audio and video signals.
4) Full Smart EDID Management functions - Smart EDID management starts with the unit’s rotary switch.
The rotary switch default position 0 is “AUTO SDR”, position 1 is “AUTO HDR”
and position 2 is “AUTO HDR 7.1”. All RAMP I/O is automated with respect to one
of these 3 positions. The input side is always given the max possible EDID
capabilities. Both outputs always scan the sink and optimize the signal for the
given display separately. Some smart parameters include upscaling, downscaling,
bt2020 support (WCG), deep color supported, HDR, etc., the overriding functions
just mean that if AUTO SDR is selected then this will be reflected in the EDID
presented to the source. The audio is by default always stereo since RAMP is a
stereo amplifier. But it is possible to choose the AUTO HDR 7.1 in case such is
needed. EDID tables are also internally manipulated between the HDBT and HDMI
ports so that HDBT never gets a real signal over 300MHz while the HDMI input
can simultaneously input 600MHz. These EDID settings carry over to the eARC
capability table as well.
5) Microphone Input - The microphone input jack is meant for a dynamic
microphone and simultaneously for a generic 3.5mm jack to connect an
iPhone/Android/etc. for listening to music. The gain setting pot is next to the
jack. There is no 48V phantom power for microphone on this product – The
CX100-RAMP is designed for a direct jack connection for a dynamic/wireless mic.
6) Audio Line Input - The audio
line input is balanced or unbalanced depending on wiring the phoenix plug.
7) Gain and Voiceover - The voice
over button mixes the microphone input on top of any currently active audio
source. When the voice-over button is pressed you can talk in the microphone and
the current audio (line input) will be ducked so the microphone can be heard
better. Once you stop talking on the microphone, the active audio will return
to full volume. The ducking depth is controlled by the pot next to the
microphone jack.
8) Control -
RS-232 (bi-directional)– control HDBaseT input device or
control the CX100-RAMP
IR – (bi-directional), with iPass for direct connect to
control processor.
IP – a full webOS is provided for controlling all device
functions.
Remote Control – An IR remote is included.
Front Panel – controls available for switching audio inputs,
mute, gain control and AV source.
UNIVERSAL AMPLIFIER APPLICATIONS
- Single
room solution for conference rooms and huddle spaces
- K-12
Classroom audio and video sharing
- Bring
Audio to remote areas of your home
- Amplify
any speaker
|
|
 |
 |
 |
 |
|
 |

|