 |
 |
 |
 |
HAA and Murideo have teamed up to create the perfect audio analysis kit! The "PLUS" Model includes AVPro 2.0 Reporting Software and the Sync-ONE2 (version 2) Lip-Sync Correction tool.
Now you can use your IPad or IPhone to act as the analyzer providing incredible ease and flexibility.
The HAA Complete Acoustic Calibration Kit PLUS supercharges the capability of the AudioTools analysis application adding professional accuracy and powerful analysis capabilities. Now you can obtain high quality data, analyze it and deliver it to your client in a professional report.
View iPad functions
Reed Sound Level Calibrator:
- Generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
- Complies with IEC 942 Class 2
- Output sound pressure levels of 94dB and 114dB
- Accuracy of ±0.5dB
- Output frequency of 1000Hz ±4%
- Accommodates sound meters with 1/2" diameter microphones
- Simply place calibrator on microphone, turn on and adjust your sound level meter
- Operates on a single 9V battery (included)
- Dimensions: 120 x 51 x 43mm
- Weight: Approx. 130g
EMM-6 Microphones:
Specifications: |
|
Element |
6 mm electret condenser |
Polar Pattern |
Omnidirectional |
Frequency Response |
18 Hz - 20 kHz |
Sensitivity |
10mV/Pa (-40 dBV, re. 0 dB = 1V/Pa) |
Impedance |
200 ohms between pins 2 and 3 |
S/N Ratio |
70 dB A-weighted |
Max Input SPL |
127 dB (1 KHz @ 1% THD) |
Operating Voltage |
Phantom Power: +15V to +48V. |
Connector |
gold plated XLR |
MUX-PRO:
Specifications: |
|
|
|
|
|
Frequency Response: |
20Hz-20kHz +/- 2 dB |
|
Dynamic Range: |
30 dB to + 120 dB (SPL) input |
|
|
|
|
Inputs |
|
|
Microphone Inputs: |
Four |
|
Type: |
Balanced |
|
Connector: |
XLR Female |
|
Input Impedance: |
40 kohms nominal |
|
Freqeuncy Response: |
20Hz – 20kHz +/-2 dB |
|
Dynamic Range: |
25dB to = 120dB SPL |
|
Maximum Input Level: |
135 dB SPL |
|
Gain Adjustment: |
±4 dB |
|
Phantom Mic Power: |
48 volts |
|
|
|
|
Output |
|
|
Output: |
One |
|
Type: |
Balanced |
|
Connector: |
XLR Male (Pins 2 & 3 signal, pin 1 ground) |
|
Output Impedance: |
110 ohms +/- 20% |
|
|
|
|
Microphone Selection: |
Manual selection of Mic 1, Mic 2, Mic3, or Mic 4 & Automatic alternating switched selection of attached microphones. |
|
|
|
|
Microphone Switching: |
Approximately one second dwell time per microphone |
|
Mic. Dwell Time Range: |
0.5 sec to 1.5 sec. (Factory adjusted to approx. 1 sec.) |
|
|
|
|
Power |
|
|
Power: |
Internal 9 V battery Pack (6 AA cells) |
|
Power Switching: |
Controlled from RTA (Phantom voltage on/off) |
|
|
|
|
General |
|
|
Case: |
Metal |
|
Size: |
(3.25" x 7.5” x 4.25") HWD |
|
Weight: |
1 lb. 5 oz. w/supplied battery installed |
|
Sync-One2:General - Dimensions (H x W x D), 144mm x 90mm x 30mm (5.6" x 3.5" x 1.2”)
- 165g (5.8oz) excluding batteries
- 16x2 OLED display for easy viewing, fast response, and low power consumption
- Operating temperature from 5 to 50 Celsius (41 to 122 Fahrenheit)
Power - 2 x AA (LR6) batteries, rechargeable AA batteries are fine too
- Reverse battery protection
- Battery life from standard AA batteries is around 50 hours of continuous operation
- A tiny current of less than 0.1 micro amps is used when off. Even so when not being used for a while it is always best to remove the batteries
- Low battery indication and auto shutdown when batteries become too low to maintain accuracy
Accuracy - Measurement of audio visual delay up to ±750 milliseconds
- Display is rounded to the nearest 1 millisecond or 1/100th of a frame, internal timing resolution of 0.05 milliseconds between light and sound pulse
- Self calibration adjusts for ambient noise and light, including fluorescent light flicker
- Automatic microphone gain adjustment during calibration process
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- High-quality microphones designed for precision audio measurement
- Built in signal generation providing a fast and accurate way to generate test tones
- An all in one carrying case that allows you to quickly deploy your analysis gear
- One year of technical support that gives you immediate assistance for acoustical issues
- All the cables you’ll need to begin calibrating immediately - Fast process efficiency that includes automated advice on acoustical decisions
- HAA recommended
iMux4 Block Diagram
Full Manual
Sample Report
The HAA Complete Acoustic Calibration Kit Includes:
MUX-PRO: Four microphone multiplexer with low noise battery power and selectable microphone choices including multiplexing four high-quality microphones at your choice of the interval. Multiplexing provides the most accurate spatially averaged response data making hand equalization and auto-EQ verification simple and affordable. View Here
Four EMM-6 High-Performance Microphones: These are type 2 microphones specifically designed for audio measurement. Rugged and accurate these microphones will transform your IPad into a state-of-the-art measurement tool. View Here
iAI2 Microphone Preamplifier & Generator: Developed specifically for Studio Six Digital AudioTools this device allows your IPad or IPhone to work with our microphones and multiplexer. The IAI2 also includes a precision digital audio generator eliminating the need for test tone DVDs or a separate generator. View Here
Sync-One2: Sync-One2 measures audio visual (or lip-sync) delays / errors and so help you make the correct adjustments to ensure everything remains in sync, without resorting to guessing. It accurately measures the time span between an audio beep and video flash (e.g. a 2-pop / flash frame or similar), giving the length of the delay and if the audio leads or lags with reference to the video. With this reading you can set the audio delay in an AV amp or audio delay unit, adjust your workflow, or be assured everything is OK. View Here
AVPro 2.0 Software License: The latest version of the AVPro2.0 is a groundbreaking refinement of the audio calibration process. Besides connecting to the IPad via a WiFi network (eliminating cumbersome cables and unreliable serial port data transfer), the software employs the latest HAA calibration checklists. The easy checklist based process guides even a novice calibrator through an efficient review of the system. You are not just tuning the system you will be evaluating sound quality, verifying component performance, and reviewing system design. All functions include handy voice based help tips. The simplest checklist actually allows an in-depth analysis and calibration in less than 2 hours. View Here
HAA Custom Case: This attractive soft case unfolds conveniently exposing all items for immediate deployment. The case holds all the kit components plus has a pouch for your IPad, cables and other accessories. View Here
Reed R8090 Sound Calibrator: The REED R8090 Sound Level Calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. It complies with IEC 942 class 2. Simply place the calibrator on microphone, turn on and adjust your sound level meter. View Here
25 Foot Optical Toslink Cable: Long range optical cable allows you to have flexibility from your workstation, feel free to move the kit around as you calibrate with the extra length.
Four Marked 25 Foot Microphone (XLR) Cables:These cables are neatly tucked away in the base of the HAA Complete Acoustic Calibration Kit. Saving you space and offering simple transport off all components. Additionally, you can easily move the microphones to various locations easily for better spatial sampling. The cable build is soft and flexible making it easy to deploy and wrap up after the job. The cables are marked so you can keep track of which mic the port is calibrated tool.
10 Foot Microphone XLR Lead for iAI2: There is a 10-foot lead to enable you to move the iAI2 around as well, place it on a desk or on the ground to save your workspace for other applications. The cable build is soft and flexible making it easy to deploy and wrap up after the job.
Potentiometer Adjustment Toos: You also get a tool to adjust the offset of the MUX-PRO as needed per microphone for "Dead On" Calibrations.
Professional acoustical analysis has never been simpler and more affordable. Designed by the HAA, this kit is everything you’ll need to provide high-value services and state-of-the-art results.
Required Tools Purchased Separately: IPad or IPhone, Studio Six Digital Digital's AudioTools App purchased through the Apple Store. AudioTools $19.99, FFT Module $19.99, Polarity Test Module $ 3.99, ETC Module $ 9.99, and Surround Generator $49.99 are recommended
WARNING: May contain chemicals known to the State of California to cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
|
|
 |
 |
 |
 |
|
 |

|